Prices

Aluminium cable

Power cable

No oil, resin, iron

Power cables from consumer electronics and office equipment

Small plastic connectors and corrugations can be left. Accepted without blocks.

Coaxial cable (GSM)

Cable from computer power supplies

Small plastic connectors and corrugations can be left.

Car wiring

Small plastic connectors and corrugations can be left. Accepted without blocks.

Construction cable zones (one layer of insulation)

Without terminals and iron elements (connectors, bolts, etc.)

Network cable

Without terminals and iron elements (connectors, bolts, etc.)

Construction cable

Without terminals and iron elements (connectors, bolts, etc.)

Household machinery

Large household machinery (cookers, washing machines, dishwashers). Small household appliances (toasters, coffee makers, mixers) and refrigerators are not accepted.

Metal shavings, ferrous metal

Cast iron

Bathtubs, radiators, engine blocks. The weight of one piece must not exceed 500 kg. Goods are purchased free of oil.

Mix scrap (mixed material)

Material thickness up to 4 mm. Sheet material, structures, etc are suitable. EXCEPT FOR REFRIGERATORS AND WHOLE GAS CYLINDERS, CYLINDERS.

Ferrous scrap (over size)

Material thickness over 4 mm, round material = ø 6 mm, dimensions 1500 x 500 x 500 mm. EXCLUDING WHOLE GAS CYLINDERS.

Ferrous scrap (in size)

Material thickness over 4 mm, round material = ø 6 mm, maximum dimensions 1500 x 500 x 500 mm. EXCLUDING CLOSED CONTAINERS.

Aluminium (mixed material)

Aluminium  mixed material (used, dyed, up to 20% iron). Aluminum sheet, old sheet, pipe, foil with a thickness of ≥ 0.2 mm.

Aluminium (mixed material)

Aluminium mixed material (used, dyed, up to 2% iron). Aluminum sheet, old sheet, pipe, foil with a thickness of ≥ 0.2 mm.

Aluminium cans

0% iron.

Aluminium sheet, old sheet, pipe

Used, dyed, up to 0% iron.

Aluminium wheel rims

The valves, wheel weights (lead) and plastic covers from the centre of the wheel must be removed. Dirt 0%.  Truck rims are AL2 category.

Aluminium casting

Ironless casting (0% iron). Engines and gearboxes must be oil-free.

Food aluminium

Knives, forks, pans and pots. The material must not be dyed and oily. Dirt 0%. Maximum dimensions 500 x 500 x 1500 mm. Teflon-coated food aluminium does not fit into this category.

Brass cartridges and cases

Cartridges containing iron are not classified under brass cartridges. Whole cartridges are not accepted. Shall not magnetize.

Brass turnings

Brass turnings must be clean, shall not magnetize. Dirt of up to 2%, moisture of up to 2%. Must be oil-free.

Brass radiators

Radiators must be clean from other metal and plastic.

Brass (mixed material)

Mixed scrap, sanitary ware excluding cartridges, sleeves. The shells of the shower hose must be empty inside. The percentage of chromed parts shall not exceed 20%. The material should be clean without plastic, glass and rubber. Shall not magnetize.

Copper scrap (mixed material)

Used sheet, pipe, wire, wire bundles. Shall not magnetize.

New production copper wire

Electrotechnical wire, minimum diameter 0.5 mm. Does not contain wire terminals, insulating tape or other insulating material. New sheet. Minimum copper content at 99%. The material must be clean, uncoated, not varnished or oily.

Electric engines

Electric engines with copper coils from 0.75 kW, starters and generators. Wires, belt washers and other mechanisms (fan, pump) must be removed from electric engines. The engine must be intact.

Lead

Scrap or components (clean, free from dirt and grime). Lead battery details do not fit under the lead category.

Stainless steel mix

Chemical analysis minimum: Ni 7.8%, Cr 16–17%. Maximum dimensions 1500 x 500 x 500 mm.

Zinc

Scrap or components. Zinc-coated material is not considered zinc.